Custom Follow Focus Gear
Estimated Delivery:Jun 15 - Jun 19
Free Shipping: On all Focus Gear and Filter orders over 49€
GUARANTEE SAFE & SECURE CHECKOUT
98% Positive reviews
Custom Follow Focus Gear
How to measure your lens for ordering a custom Follow Focus Gear and learn about our grub screw system:
We produce perfect fitting, high quality 3D printed Follow Focus Gears for you.
No matter if you’d like to measure on your own or if you want to send in
or drop off your lens at our office in Augsburg.
These gears are unlike the other gears of this site not flexible but hard.
Measure your lens for ordering a custom Follow Focus Gear:
If you don’t want to send it your lens, here is a manual how you can measure the lens by your self: You have to measure the perimeter of the focus ring from your lens. You can do this by using a caliper or flexible measuring tape. We recommend the measuring tape. If you don’t have one at home – just download this measuring paper:
Measurement for Custom Follow Focus Gear
(Make shure to print it in 100%size!)
If you are measuring the diameter, you just have to multiply it with 3.16 to get the perimeter.
1. Measure the perimeter of your focus ring of the lens
To find out the required inner perimeter of the gear, lay the measuring tape around the focusring of your lens and pull it tightly together. In this example the perimeter of the lens ist 246 mm. (If you choose without grub screw, we will add 0,1mm diameter for a good fit)
2. Choose the width of your Custom Follow Focus Gear
The width of our gears is usually 10mm, which is enough for the common follow focus systems. Some lenses have a smaller focus ring. Make sure that the width of the gear is slightly smaller than the width of your focus ring of the lens.
3. Choose the thickness of your Custom Follow Focus Gear
The last specification for the custom follow focus gear is the thickness of the gear. The thickness is the difference from the inside diameter to the outside diameter of the Follow Focus Ring. We usually produce our gears with a thickness of 6mm which is perfect for a good ring stiffness.
4. Our grub screw option for a perfect fit
A diameter of 0,1mm more or less will affect if the following focus gears fit well on your lens or not. That’s why our custom follows focus gears comes with 2 grub screws. In this way, we can guarantee that the gear will fit perfectly. But no worry as you can see in the video the screw whole won’t affect the focusing.
If you still rather want custom gear without a grub screw you can select this at your own risk. If the gear is too tight then you may sand it down or if it’s too wide you can use some tape between the focus gear and lens.